SUNDAY, AUGUST 9, 2009 |
| 15.00 – 18.00 | Registration | |
| 19.00 – 20.00 | Welcome Reception | |
MONDAY, AUGUST 10, 2009 |
| 08.00 – 08.50 | Registration | |
| 08.50 – 09.00 | Opening | |
| 09.00 – 10.20 | Session 1 |
| Chair: R. J. GOLDSTEIN |
| | Keynote | Turbine Airfoil Leading Edge Aerodynamics and Heat Transfer – A Review |
| Lee S. LANGSTON, Brian M. HOLLEY |
| | Keynote | Recent Progress in Numerical Simulation of Highly Three-Dimensional Turbulent Flows and Endwall Heat Transfer in Turbine Blade Cascades |
| Evgueni M. SMIRNOV |
| | | |
| 10.20 – 10.40 | Coffee Break | |
| | | |
| 10.40 – 13.00 | Session 2 |
| Chair: T. W. SIMON |
| | 18-TE | Experimental Investigation of Turning Flow Effects on Innovative Trailing Edge Cooling Configurations with Elliptic Pin Fins |
| Carlo CARCASCI, Francesco SIMONETTI |
| | 33-THT | Heat Transfer Characteristics on Tip and Inner Rim Surfaces of Rotor Blade with Squealer Rim |
| Jun Su PARK, Dong Hyun LEE, Woo Jin LEE, Hyung Hee CHO, Dong-Ho RHEE, ShinHyung KANG |
| | 38-THT | Advanced Aero-thermal Investigation of High Pressure Turbine Tip Flows |
| Péter VASS, Tony ARTS |
| | 42-TE | Trailing Edge Eilm Cooling of Gas Turbine Airfoils –Effects of Ejection Lip Geometry on Film Cooling Effectiveness and Heat Transfer |
| Tim HORBACH, Achmed SCHULZ, Hans-Joerg BAUER |
| | 52-THT | Augmented Heat Transfer of an Internal Blade Tip by Full or Partial Arrays of Pin-fins |
| Gongnan XIE, Bengt SUNDEN, Lieke WANG, Esa UTRAINIEN |
| | 62-THT | Flow and Heat Transfer on and near a Transonic Turbine Blade Tip |
| Qiang ZHANG, Devin O’DOWD, Phillip LIGRANI, Li HE, Andrew WHEELER |
| | 22-JI | Effects of Mach Number, Reynolds Number, and Jet Spacing on Surface Heat Transfer for a Full Array of Impinging Jets |
| Matt GOODRO, Phil LIGRANI, Mike FOX, Hee-Koo MOON |
| | | |
| 13.00 – 15.00 | Break | |
| | | |
| 15.00 – 17.00 | Session 3 |
| Chair: A. I. LEONTIEV |
| | Keynote | Turbine Airfoil Aerothermal Characteristics in Future Coal-Gas Based Power Generation Systems |
| Minking K. CHYU, Mary Anne ALVIN |
| | 32-COMB | Thermal-mechanical Life Prediction in After Shell Section of Gas Turbine Combustion Liner |
| Kyung Min KIM, Yun Heung JEON, Namgeon YUN, Dong Hyun LEE, Hyung Hee CHO |
| | 68-COMB | Coupling Study between heat Transfer and Aerodynamic Flow in Square-edged Inlet |
| Phu Hung NGUYEN, Viet Hung NGUYEN, Eva DORIGNAC |
| | 60-COMB | Heat Transfer Investigation of the Sub- and Supercritical Fuel Flow through a U-turn Tube |
| C. B. ZHANG , Z. TAO , G. Q. XU , H. W. DENG, J. N. SUN |
| | | |
| 17.00 – 17.20 | Coffee Break | |
| | | |
| 17.20 – 18.40 | Session 4 |
| Chair: B.V.S.S.S. PRASAD |
| | 11-SA | Calculation of Gas Turbine Blade Temperatures Using an Iterative Conjugate Heat Transfer Approach |
| Mangesh KANE, Savas YAVUZKURT |
| | 43-FC | Effect of Internal Rib Configurations on the Discharge Coefficient of a 30-deg Inclined Film Cooling Hole |
| Christian HENEKA, Achmed SCHULZ, Hans-Joerg BAUER |
| | 61-FC | Influence of Internal Cyclone Flow on Adiabatic Film Cooling Effectiveness |
| Andreas LERCH, Heinz-Peter SCHIFFER |
| | 69-FC | Study on the Thermal and Flow Fields of Film Cooling with Shaped Film Cooling Holes |
| Kenichiro TAKEISHI, Satoshi HADA, Shohei MORI, Masaharu KOMIYAMA |
| | | |
TUESDAY, AUGUST 11, 2009 |
| 09.00 – 10.20 | Session 5 |
| Chair: H.-P. SCHIFFER |
| | Keynote | Film Cooling: Breaking the Limits of Diffusion Shaped Holes |
| Ron S. BUNKER |
| | Keynote | Experimental determination of the aero-thermal performance of high pressure gas turbine blades |
| Tony ARTS |
| | | |
| 10.20 – 11.00 | Coffee Break & Posters |
| | 8-COMB | Experimental Study of Equivalence Ratio Influence on Thermoacoustic Instability in Gas Turbines |
| | Nasser Seraj MEHDIZADEH, Nozar AKBARI, Reza EBRAHIMI |
| | 35-COMB | Analytical and Experimental Analysis of Reactants Velocity Effect on Instability of Premixed Combustion Chamber |
| | Nasser SERAJ MEHDIZADEH, Nozar AKBARI, Reza EBRAHIMI |
| | 23-FC | A Comparative Study of the Film Cooling Hole Configuration Effects on the Leading Edge of Asymmetrical Turbine Blade |
| | Mustapha BENABED, Abbès AZZL, B. A JUBRAN |
| | 28-FC | Comparison Study of Closure Models for Modeling a Flow on Curved and Flat Plates. Film Cooling of Gas Turbine Blade Application |
| | R. DIZENE, A. BERKACHE, S. BENMANSOUR |
| | 29-FC | First Moment Closure Modeling of Film Cooling Effectiveness in Single Row of Cylindrical Holes |
| | Farzad BAZDIDI-TEHRANI, Hosein FOROUTAN, Mehran RAJABI-ZARGARABADI |
| | 27-EFHT | Front Bulkhead Upstream Flow Effect on the Inlet Gide Vanes of MS5002B Gas Turbine Compressor |
| | D. CHERKERKER, Rabah DIZENE |
| | 30-EFHT | Modeling of Heat Transfer in Exhaust Nozzle of Gas Turbines |
| | Özge ALTUN, Y. Erhan BÖKE |
| | 3-SA | A New Unsteady Fluid Network Approach to Simulate the Characteristics of the Air System of a Gas Turbine System |
| | Shengping HOU, Zhi TAO, Shuiting DING |
| | 40-SA | Optimization of a Gas Turbine Stator Nozzle Cooling Using Genetic Algorithms |
| | Biagio MORRONE, Andrea UNICH, Antonio MARIANI, Vincenzo de MAIO |
| | 65-EW | Effects of Stator/rotor Leakage Flow and Axisymmetric Contouring on Endwall Adiabatic Effectiveness |
| | Ryan ERICKSON, Terrence W. SIMON |
| | 66-EW | Effects of Wheelspace Coolant Injection and Gap Geometry on Blade Endwall Heat/Mass Transfer |
| | Marco PAPA, V. SRINIVASAN, R. J. GOLDSTEIN, Fabio GORI |
| | 39-P | Impact of the Geometry on the Improvement of the Thermal Transfer of the Turbulent Flows |
| | Ahmed Zineddine DELLIL, Abbès AZZI |
| | 54-SA | Combined Heat Exchange Intensification Techniques as a Key to Development of Automotive |
| | Anatoly V. SUDAREV |
| | 59-CHFT | PIV Measurements of the Flow in a Rotating Cavity with a Radial Inflow |
| | Yu XIAO, X. LUO, G. Q. XU , J. N. SUN |
| | 53-EW | Optimization of a Turbine Vane Endwall Using a Combined Natural and Numerical Approach |
| S.O. NEUMANN, H. STEINBRÜCK, S. ZEHNER, B. WEIGAND |
| | |
| | | |
| 11.00 – 12.20 | Session 6 |
| Chair: A. I. KIRILLOV |
| | 6-FC | Study on Influence of Initial Wall Temperature Distribution on the Transient Measurement Results of Film Cooling |
| Cun-liang LIU , Hui-ren ZHU, Jiang-tao BAI , Du-chun XU |
| | 10-FC | Comparison of Film Cooling in the Presence of Various Mainstream Pressure Gradients |
| Cun-liang LIU, Hui-ren ZHU, Guang-Chao LI, Du-chun XU |
| | 16-FC | A Correlation-based Methodology to Predict the Flow Structure of Flows Emanating from Cylindrical Holes with Application to Film Cooling |
| Tilman auf dem KAMPE, Stefan VÖLKER |
| | 25-FC | Effect of the Geometry of Film Cooling Holes on Heat Transfer Coefficient in Condition of Various Mainstream Pressure Gradients |
| Xiao-wei ZHANG, Hui-ren ZHU, Guang-Chao LI, Du-chun XU |
| | | |
| 12.20 – 15.00 | Break | |
| | | |
| 15.00 – 17.00 | Session 7 |
| Chair: K. TAKEISHI |
| | Keynote | Film Cooling Simulation and Control |
| Sumanta ACHARYA |
| | 12-EFHT | Turbine Vane Cascade Heat Transfer Predictions Using a Modified Version of the γ – Reθt Laminar-Turbulent Transition Model |
| Evgueni SMIRNOV, Alexander SMIRNOVSKY |
| | 26-CHFT | Large Eddy Simulation of Non-isothermal Flow in Rotor/stator Cavity |
| Ewa TULISZKA-SZNITKO, Artur ZIELINSKI, Wojciech MAJCHROWSKI |
| | 63-SA | Comparison of Counter – Rotating and Traditional Axial Aircraft Low-pressure Turbines Integral and Detailed Performances |
| Leonid MOROZ, Petr PAGUR, Yuri GOVORUSCCHENKO , Kirill GREBENNIK |
| | | |
| 17.00 – 17.20 | Coffee Break | |
| | | |
| 17.20 – 18.20 | Session 8 |
| Chair: P. LIGRANI |
| | 9-EW | Numerical Simulation of the Endwall Heat Transfer in the Langston Cascade |
| Alexander M. LEVCHENYA, Evgueni M. SMIRNOV, Dmitry ZAYTSEV |
| | 44-EW | An Experimental Study of Airfoil and Endwall Heat Transfer in a Linear Turbine Blade Cascade – Secondary Flow and Surface Roughness Effects |
| Marco LORENZ, Achmed SCHULZ, Hans-Jörg BAUER |
| | | |
| 20.00 – 23.00 | Gala Dinner | |
| | | |
WEDNESDAY, AUGUST 12, 2009 |
| | | |
| 09.00 – 10.40 | Session 9 |
| Chair: A. SCHULZ |
| | Keynote | Heat Transfer Testing in Engine Turbine Cooling System Development |
| Peter IRELAND |
| | 17-IFHT | Predicting the Coolant Flow and Heat Transfer in Radial Turbine Blades |
| Aidin PANAHI, Mozzafar Ali MEHRABIAN |
| | 21-IFHT | Effect of Rotation to the Cyclone Cooling Method Mass Transfer Measurements |
| Nils WINTER, Martin KEGALJ, Heinz-Peter SCHIFFER |
| | | |
| 10.40 – 11.00 | Coffee Break | |
| | | |
| 11.00 – 12.00 | Session 10 |
| Chair: T. W. SIMON |
| | | The Role of Gas Turbines in Global Energy Conversion |
| Lee S. Langston |
| | | |
| 12.00 - | End of Day | |
| | | |
THURSDAY, AUGUST 12, 2009 |
| | | |
| 09.00 – 10.20 | Session 11 |
| Chair: E. DORIGNAC |
| | Keynote | Recent Studies in Turbine Blade Internal Cooling |
| Je-Chin HAN, Mike HUH |
| | Keynote | Multiple Jet Impingement – A Review |
| Bernhard WEIGAND, Sebastian SPRING |
| | | |
| 10.20–10.40 | Coffee Break | |
| | | |
| 10.40 – 13.00 | Session 12 |
| Chair: F. MARTELLI |
| | 7-JI | Influence of Height to Diameter Ratio on Impingement Heat Transfer on Effused Concave Surface |
| M. Ashok KUMAR, B.V.S.S.S. PRASAD |
| | 19-JI | Experimental Study of Heat Transfer from Impinging Jet with Upstream and Downstream Crossflow |
| Daniel THIBAULT, Matthieu FENOT, Gildas LALIZEL, Eva DORIGNAC |
| | 41-JI | An Experimental and Numerical Investigation of Impingement Heat Transfer in Airfoils Leading-edge Cooling Channel |
| M. E. TASLIM, A. ABDELRASOUL |
| | 34-IFHT | Liquid Crystal Thermography for Transient Heat Transfer Measurements in Complex Internal Cooling Systems |
| Rico POSER, Jens von WOLFERSDORF |
| | 47-JI | Experimental (by tlc Method) and Theoretical Analyse of Heat Transfer Characteristics on a Rectangular Cross-section Duct with Impingement Jet |
| Unal UYSAL, Fatih SAHIN, M. K. CHYU |
| | | |
| 13.00 – 15.00 | Break | |
| | | |
| 15.00 – 17.00 | Session 13 |
| Chair: J.-Chin HAN |
| | Keynote | Experimental Turbine Aero-Heat Transfer Studies in Rotating Research Facilities |
| Cengiz CAMCI |
| | 56-FC | Mixing of Air and CO2 Study on a Turbine Blade |
| Yavuz Hakan ÖZDEMIR, Seyfettin BAYRAKTAR, Tamer YILMAZ |
| | 57-FC | Investigation of Film Cooled Rough Surfaces Using Large Eddy Simulation |
| Prasad KALGHATGI, Sumanta ACHARYA |
| | 64-FC | The Effect of Embedded Vortices on Film Cooling with Compound Angle Orientations |
| Hyo Kyung CHUNG, Young-Su NA, Joon Sik LEE |
| | | |
| 17.00 – 17.20 | Coffee Break | |
| | | |
| 17.20- 19.00 | Session 14 |
| Chair: L. S. LANGSTON |
| | 36-SA | A Novel Method for the Computation of Conjugate Heat Transfer with Coupled Solvers |
| Tom VERSTRAETE, Rene Van den BRAEMBUSSCHE |
| | 48-SA | Application of Artificial Neural Network (ANN) Method to Exergetic Analyses of Gas Turbines |
| Yilmaz YORU, T. Hikmet KARAKOC, Arif HEPBASLI |
| | | |
| 19.00 - 19.10 | Closing Remarks | |